American-standard ELITE 4454 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Werkzeug American-standard ELITE 4454 herunter. American Standard ELITE 4454 User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 4
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
4453 SERIES
4454 SERIES
ELITE
Installation
Instructions
M968202 REV.1.2
Certified to comply with ANSI A112.18.1M
1
INSTALL FAUCET WITH OR WITHOUT DECK ESCUTCHEON
CAUTION
Turn off hot and cold water
supplies before beginning.
SINGLE CONTROL KITCHEN FAUCET
and HAND SPRAY
1
2
8
A
B
PUTTY
SPOUT BASE
SPOUT BASE
SQUARE
SEAL RING
8
SQUARE
SEAL RING
4
SINK OR
MOUNTING
SURFACE
2
3
4
5
6
7
9
3
0
1
2
3
4
5
6
Assemble RUBBER WASHER (5), BRASS WASHER (6), and threaded LOCKNUT (7) onto SHANK (4) from underside
of sink or mounting surface. Hand tighten LOCKNUT (7) and check that rotation of HANDLE (8) from HOT to COLD
is centered.
Use a screwdriver to tighten SCREWS (9) on LOCKNUT (7). Work your way around LOCKNUT (7), tightening
the screws slightly each time until all are snug to ensure even pressure.
(A) Installation with ESCUTCHEON (1). Apply a bead of putty to bottom edge of ESCUTCHEON WITH PUTTY PLATE (1).
Insert supply HOSES (3) and SHANK (4) through hole of ESCUTCHEON WITH PUTTY PLATE (1) and mounting surface.
Make certain the SQUARE SEAL RING (2) is properly seated in recess of SPOUT BASE. Follow mounting instructions below
to secure faucet to mounting surface.
(B) Installation less ESCUTCHEON (1). Remove ESCUTCHEON WITH PUTTY PLATE (1) and Insert supply HOSES (3) and
SHANK (4) through mounting hole and seat SPOUT BASE onto sink or mounting surface. Make certain the SQUARE SEAL
RING (2) is properly seated in recess of SPOUT BASE. Do not use putty.
CARE:
5
6
7
9
Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
TOOLS REQUIRED
Plumbers' Putty or Caulking
Adjustable WrenchChannel Locks Regular Screwdriver
Phillips Screwdriver
Seitenansicht 0
1 2 3 4

Inhaltsverzeichnis

Seite 1 - 4454 SERIES

4453 SERIES4454 SERIESELITEInstallationInstructionsM968202 REV.1.2Certified to comply with ANSI A112.18.1M1INSTALL FAUCET WITH OR WITHOUT DECK ESCUTCHE

Seite 2 - M968202 REV.1.2

On model with separate spray, place the SPRAY HOLDER (1)into the appropriate mounting hole. Assemble the SPRAYHOLDER WING NUT (2) onto the shank of SP

Seite 3

5TEST INSTALLED FAUCETMove HANDLE down into "off" position and remove AERATOR.Turn on water supplies and check connections for leaks.Operate

Seite 4 - FAUCET with HAND SPRAY

MODEL NUMBERS4453 SERIES4454 SERIESELITESINGLE CONTROL KITCHENFAUCET with HAND SPRAYM909320-YYY0ASPOUT FLANGE042850-0070ADIVERTER060366-0070ASPOUT SEA

Verwandte Modelle: ELITE 4453

Kommentare zu diesen Handbüchern

Keine Kommentare