American Standard 2742.XXXW Bedienungsanleitung PDF herunterladen (Seite 1)

INSTALLATION INSTRUCTIONS

753027-100 REV. E

© American Standard Inc. 2007

All product names listed herein are trademarks

of American Standard Inc. unless otherwise noted.

HIGH GLOSS ACRYLIC

SHOWN LESS ALL FITTINGS

TOWN SQUARE™

6' X 42"

WHIRLPOOL/BATHING POOL

2742.XXXW SERIES

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

List of Required Components (not included):

List of Optional Components (not included):

• Drain 1594.170

• Bath Filler

• Safe-T-Heater 9075.120*

List of Required Tools and Supplies:

Tools

• Level

• Tape Measure

• Pipe Wrench

• Slip Joint Pliers

• Screw Driver

• Standard

Woodworking Tools

• Personal Safety

Equipment

• Caulking Gun

Supplies

• Nails

• Putty

• Caulking (waterproof)

• 1 x 3 or 2 x 2

Stringers

• Drop Cloth

• 20 amp GFI Outlet

• Cement, Plaster,

Grout

THANK YOU...

for selecting an American Standard bath. Your

new bath is shipped to you after careful

inspection. The whirlpool version is completely

assembled with pump, motor, and system

piping. All you need to ﬁnish the installation

are your selected ﬁttings and electrical

connections for a whirlpool.

To insure maximum performance and pleasure

from this product, please follow the

instructions and cautions.

GENERAL INSTALLATION INFORMATION

Carefully uncrate and inspect your new bath for

any shipping damage. If such damage is found,

report it to your vendor immediately.

After inspection and during installation, protect

the bath from construction damage. After

installation, and before enclosing with wallboard,

tile, etc., water test the unit and check for leaks.

Do not make modiﬁcations to the whirlpool

system or remove pump from factory mounting.

This could adversely affect the safety and

performance of the whirlpool and void the

warranty. Do not handle or move the whirlpool by

the pump, motor, or piping system.

Fittings (bath ﬁller, shower arm, etc.) are not

provided with the bath and must be ordered

separately. Framing and enclosing materials are

provided by others.

Protect all ﬁnished surfaces of the whirlpool

during construction and installation using a drop

cloth.

WARNING! Do not lift whirlpool by the piping

harness at any time.

41-3/4"

(1060mm)

26-3/4

(679mm)

C/L OF DRAIN OUTLET

OUTLINE OF

SKID RESISTANT

SURFACE

71-1/2"

(1816mm)

35-3/4"

(908mm)

13-1/4"

(337mm)

4"

(102mm)

3"

(76mm)

FLOOR CUTOUT

5" X 15"

(127 X 381mm)

OUTLINE OF CUTOUT

70" X 40-1/4"

(1778 X 1022mm)

PROVIDE ACCESS

TO PUMP FOR

SERVICE ON ALL

INSTALLATIONS

INTEGRAL

FITTING DECK

2-1/4" X 14"

(57 X 356mm)

ON/OFF

SWITCH

LEVELING STRINGER

(NOT FOR SUPPORT)

1-1/2" N.P.T. THREADS

2"

(51mm)

3-1/4"

(83mm)

C/L OF

OVERFLOW

20"

(508mm)

22"

(559mm)

ROUGH

FLOOR

INTEGRAL

FEET

SUPPORT

1-1/2" O.D.TAILPIECE

5/8"

(16mm)

3"

(76mm)

PUMP

3/4"

(19mm)

JETS (8)

EDGE OF

FLOOR

CUTOUT

SUCTION

PUMP

SAFE-T-

HEATER

REMOVABLE

BLANK

GENERAL SPECIFICATIONS FOR 2742 WHIRLPOOL

71-1/2 x 41-3/4 x 22 In. (1816 x 1060 x 559mm)

115 Lbs. (52 Kg.)

690 Lbs. (313 Kg.)

69 Gal. (261 L)

60 Gal. (227 L)

41 x 21-1/2 In. (1041 x 546mm)

62 x 31-1/2 In. (1574 x 800mm)

14-1/4 In. (362mm)

33 Lbs./Sq.Ft. (163 Kgs./Sq.m)

27.8

55.7

2.1 HP, 14.4 AMPS ,120V.WHIRLPOOL PUMP

WHIRLPOOL ELECTRICAL SPECIFICATIONS

INSTALLED SIZE

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

WHIRLPOOL MIN. OPERATING VOL.

BATHING WELL AT SUMP

BATHING WELL AT RIM

WATER DEPTH TO OVERFLOW

FLOOR LOADING

(PROJECTED AREA)

PTS.

CUBE (FT

3

)

1 2 3 4

Inhaltsverzeichnis

Seite 1 - 2742.XXXW SERIES

INSTALLATION INSTRUCTIONS753027-100 REV. E© American Standard Inc. 2007All product names listed herein are trademarksof American Standard Inc. unless

Seite 2 - WILL NOT BE PERFORMED

753027-100 REV. E(2)UNLESS AN ACCESS OPENING OFAT LEAST 12" X 24" (305 X 610MM)IS PROVIDED, WARRANTY SERVICEWILL NOT BE PERFORMED.LEVELINGSU

Seite 3 - ELECTRICAL DIAGRAM

ELECTRICAL DIAGRAMREAD AND FOLLOW ALL INSTRUCTIONSBLACKWHITE120 VACGND.WHIRLPOOL MOUNTEDAIR SWITCH ORWALL TIMER ELECTRICAL INSTALLATIONFOR AIR MASSAGE

Seite 4 - WIRE SELECTION GUIDE

WIRE SELECTION GUIDE753027-100 REV. EMaximum distance fromfusebox to motorThe sizes shown on thischart are recommendationsfor copper conductorsonly.

Kommentare zu diesen Handbüchern

Keine Kommentare