American Standard 2805.XXXW Bedienungsanleitung PDF herunterladen

INSTALLATION INSTRUCTIONS

752294-100 Rev. K

© American Standard Inc. 2004

All product names listed herein are trademarks

of American Standard Inc. unless otherwise noted.

HIGH GLOSS ACRYLIC

SHOWN LESS ALL FITTINGS

HERITAGE

5' x 42"™

SERIES WHIRLPOOL

2805.XXXW

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

THANK YOU...

for selecting an American Standard bath. Your new

bath is shipped to you after careful inspection. The

whirlpool version is completely assembled with pump,

motor, and system piping. All you need to finish the

installation are your selected fittings and electrical

connections for a whirlpool.

To insure maximum performance and pleasure from

this product, please follow the instructions and

cautions.

GENERAL INSTALLATION INFORMATION

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor

immediately.

After inspection and during installation, protect the bath from construction damage. After installation, and before

enclosing with wallboard, tile, etc., water test the unit and check for leaks.

Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect

the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump,

motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and

enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead

(required for recess installations).

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping harness at any time.

List of Optional Components (not included):

• 5 Foot Apron*

• Safe-T-Heater 9075.120*

* see your American Standard Distributor

List of Required Components (not included):

• Drain 1583.470*

• Bath Filler*

* see your American Standard Distributor

List of Required Tools and Supplies:

Tools

• Level

• Tape Measure

• Pipe Wrench

• Slip Joint Pliers

• Screw Driver

• Standard

Woodworking Tools

• Personal Safety

Equipment

• Caulking Gun

Supplies

• Nails

• Putty

• Caulking (waterproof)

• 1 x 3 or 2 x 2

Stringers

• Drop Cloth

• 15 or 20 amp GFCI

Outlet

• Cement, Plaster,

Grout

GENERAL SPECIFICATIONS FOR 2805 WHIRLPOOL

60 x 42 x 21-1/2 In. (1524 x 1067 x 546mm)

130 Lbs. (59 Kg.)

689 Lbs. (310 Kg.)

64 Gal. (243 L)

52 Gal. (197 L)

43 x 22 In. (1092 x 559mm)

55 x 35-1/2 In. (1397 x 902mm)

15 In. (381mm)

39 Lbs./Sq.Ft. (191 Kgs./Sq.m)

27.8

47.4

1.6 HP, 9.7 AMPS ,120V.

2.1 HP, 15.6 AMPS ,120V.

SYSTEM I PUMP

SYSTEM II PUMP

WHIRLPOOL ELECTRICAL SPECIFICATIONS

INSTALLED SIZE

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

WHIRLPOOL MIN. OPERATING VOL.

BATHING WELL AT SUMP

BATHING WELL AT RIM

WATER DEPTH TO OVERFLOW

FLOOR LOADING

(PROJECTED AREA)

PTS.

CUBE (FT

3

)

1524mm

(60)

INTEGRAL

FITTING DECK

762mm

(30)

1067mm

(42)

ON/OFF

SWITCH

OUTLINE OF CUTOUT

1486mm x 1029mm

(58-1/2 x 40-1/2)

PROVIDE ACCESS

TO PUMP FOR

SERVICE ON ALL

INSTALLATIONS

C/L OF

DRAIN

178mm x 381mm

(7 x 15)

FLOOR

CUTOUT

19mm

(3/4)

PUMP

305mm

(12)

152mm

(6)

1-1/2 N.P.T.

THREADS

ROUGH

FLOOR

INTEGRAL

FEET

SUPPORT

1-1/2 O.D.

TAILPIECE

546mm

(21-1/2)

495mm

(19-1/2)

133mm

(5-1/4)

64mm

(2-1/2)

121mm

(4-3/4)

LEVELING STRINGER

NOT FOR SUPPORT

C/L OF

OVERFLOW

51mm(2)

SAFE-T-HEATER

REMOVABLE

BLANK

1 2 3 4

Inhaltsverzeichnis

Seite 1 - 2805.XXXW

INSTALLATION INSTRUCTIONS752294-100 Rev. K© American Standard Inc. 2004All product names listed herein are trademarksof American Standard Inc. unless

Seite 2 - TYPICAL RECESS INSTALLATION

752294-100 Rev. K(2)495mm(19-1/2)INSTALLATION AND FRAMING INSTRUCTIONSThe variety of installations possible for this whirlpool may require framing pro

Seite 3 - ELECTRICAL DIAGRAM

752294-100 Rev. K(3)ELECTRICAL DIAGRAMREAD AND FOLLOW ALL INSTRUCTIONSBLACKWHITE120 VACGND.SEPARATE 15 AMP GFCIFOR 1.6HP MODELSWHIRLPOOL MOUNTEDAIR or

Seite 4 - SPIC AND SPAN

752294-100 Rev. KDRAIN CONNECTION AND SYSTEM TESTUsing recommended drain opening, connect whirlpool drain to waste line. Tighten all drain joints sec

Kommentare zu diesen Handbüchern

Keine Kommentare